2.3–21 GHz broadband and high linearity distributed low noise amplifier

This paper focuses on the design of a 2.3–21 GHz Distributed Low Noise Amplifier (LNA) with low noise figure (NF), high gain (S₂₁), and high linearity (IIP3) for broadband applications. This distributed amplifier (DA) includes S/C/X/Ku/K-band, which makes it very suitable for heterodyne receivers. The proposed DA uses a 0.18 μm GaAs pHEMT process (OMMIC ED02AH) in cascade architecture with lines adaptation and equalization of phase velocity techniques, to absorb their parasitic capacitances into the gate and drain transmission lines in order to achieve wide bandwidth and to enhance gain and linearity. The proposed broadband DA achieved an excellent gain in the flatness of 13.5 ± 0.2 dB, a low noise figure of 3.44 ± 1.12 dB, and a small group delay variation of ±19.721 ps over the range of 2.3–21 GHz. The input and output reflection coefficients S₁₁ and S₂₂ are less than −10 dB. The input compression point (P_1dB) and input third-order intercept point (IIP3) are −1.5 dBm and 11.5 dBm, respectively at 13 GHz. The dissipated power is 282 mW and the core layout size is 2.2 × 0.8 mm².     

Assessment of plastic damage in high strength structural steel using electromagnetic technique

ABSTRACT

High strength structural (HSS) steels are widely used in many construction equipment and infrastructures. Currently, there is a substantial demand of Non-Destructive Testing of these steel structures. In this research, the electromagnetic technique was utilised to assess the plastic damage in a typical HSS steel (i.e. Q690 steel). The results showed that the magnetic hysteresis loop of this material changed apparently after the tensile deformation, and the relevant magnetic parameters such as coercivity, remanence, and maximum permeability were sensitive to the cumulative plastic strain. The results demonstrated that there is a good coherence between the plastic damage evolution and the magnetic parameters variation, which indicated that the electromagnetic technique is an effective method to assess the plastic damage of HSS steel.     

Investigation of the hydrogen induced cracking behaviour of API 5L X65 pipeline steel

The effect of microstructural features on the hydrogen induced cracking (HIC) susceptibility of two API 5L X65 pipeline steels were investigated by cathodic charging, hydrogen permeation and hydrogen microprint experiments. Microstructural evaluation after hydrogen charging revealed cracks at the mid-thickness (segregation zone) of both plates. However, more severe cracks were observed in the plate with higher dislocation density and residual stresses. The plate with lower plastic strain and more {111}-oriented grains had less severe cracks. Inclusions found along the crack path, comprising of Si-enriched oxides and carbides contributed to the initiation and propagation of cracks. The variation of the trapping behaviour and hydrogen diffusion through the plates were examined. The results confirmed that a higher ratio of reversible to irreversible traps contributes to increasing HIC severity in steels. Additionally, hydrogen transport through the steels was most prominent along the grain boundaries, indicating the importance of grain boundary character to HIC.     

食用百合高效生态栽培技术

文章从食用百合的经济意义入手,分析了现阶段百合生产存在的问题,总结了食用百合高效生态栽培技术,期望为食用百合的栽培提供理论基础与实践经验。     

Effects of graphite nano-flakes on thermal and microstructural properties of TiB2–SiC composites

In the last decades, the production of ultra-high temperature composites with improved thermo-mechanical properties has attracted much attention. This study focuses on the effect of graphite nano-flakes addition on the microstructure, densification, and thermal characteristics of TiB₂–25 vol% SiC composite. The samples were manufactured through spark plasma sintering process under the sintering conditions of 1800 °C/7 min/40 MPa. Scanning electron microscopy images demonstrated a homogenous dispersion of graphite flakes within the TiB₂–SiC composite causing a betterment in the densification process. The thermal diffusivity of the specimens was gained via the laser flash technique. The addition of graphite nano-flakes as a dopant in TiB₂–SiC did not change the thermal diffusivity. Consequently, the remarkable thermal conductivity of TiB₂–SiC remained intact. It seems that the finer grains and more interfaces obstruct the heat flow in TiB₂–SiC–graphite composites. Adding a small amount of graphite nano-flakes enhances the densification of the mentioned composite by preventing the grain growth.     

Parametric study of aluminium alloy fouling in marine environment using RSM technique

ABSTRACT

Fouling is known to be a prominent industrial problem which is greatly affected by parameters like temperature, time and flowrate. The aim of this work was to simulate the fouling process in AA 6061 by developing a model through Minitab 16 and evaluate the models. Box Behnken design of Response surface methodology was applied for modelling and optimization of fouling propensity in artificial sea water. A response surface model was obtained and Analysis of Variance was performed to test the significance of the model. Fouling propensity was found in terms of weight gain. An experimental rig consisting of a recirculating loop mimicking the industrial conditions of fouling was used in the study. SEM analysis shows uneven deposits on the metal surface. Sharp, irregular deposits pressed deep into the metal was observed. The finding of this work would enable us to evaluate the individual and interactive effects of the parameters.     

Seeing is believing? When scanning electron microscopy (SEM) meets clinical dentistry: The replica technique.

In restorative dentistry, the in situ replication of intra‐oral situations, is based on a non‐invasive and non‐destructive scanning electron microscopy (SEM) evaluation method. The technique is suitable for investigation restorative materials and dental hard‐ and soft‐tissues, and its interfaces. Surface characteristics, integrity of interfaces (margins), or fracture analysis (chipping, cracks, etc.) with reliable resolution and under high magnification (from ×50 to ×5,000). Overall the current study aims to share detailed and reproducible information about the replica technique. Specific goals are: (a) to describe detailed each step involved in producing a replica of an intra‐oral situation, (b) to validate an integrated workflow based on a rational sequence from visual examination, to macrophotography and SEM analysis using the replica technique; (c) to present three clinical cases documented using the technique. A compilation of three clinical situations/cases were analyzed here by means the replica technique showing a wide range of possibilities that can be reached and explored with the described technique. This guidance document will contribute to a more accurate use of the replica technique and help researchers and clinicians to understand and identify issues related to restorative procedures under high magnification.     

中子平衡节块离散纵标法及CMFD加速技术研究

本文基于横向积分离散纵标方程,解析得到横向积分通量中出射通量与入射通量的关系,并根据类似于扩散方程节块展开法的输运节块中子平衡方程形式,得到了一种高效的节块离散纵标法数值迭代策略。数值结果表明,本文提出的方法可行且数值结果正确。此外,粗网有限差分(CMFD)加速技术在节块离散纵标法中也取得了非常好的应用效果。     

复频电导技术在隧洞超前探水中的应用

围岩富水带是隧道超前预报最关注的问题，目前，多使用电磁方法来预报围岩的含水性，但受到场地条件限制，面临掌子面条件、金属机具干扰、三维波场定位等诸多困难，特别是掌子面前方100 m范围内围岩的含水性预报，在国内外都是一个新的高难课题。在研究了岩体电导率与电容率复频特性的基础上，结合巴基斯坦NJ-TBM引水隧洞工程，开发了复频电导探水(CFC)技术。该技术基于电磁波反射与相干原理，选用100 kHz～10 MHz频率范围，采用电偶极子发射与阵列接收方式和偏移成像技术，突破了隧道内场地条件的限制。依据1/4相干波长确定含水体的位置，相干能量确定含水量的大小。在巴基斯坦NJ-TBM隧洞超前探水的应用，证明了该方法的可行性与有效性。      

Effects of system dynamics and applied force on adhesion measurement in colloidal probe technique

Dynamic pull-in/pull-off forces were quantitatively measured using an AFM colloidal probe technique. Two spherical colloids made of silicon dioxide (SiO₂) and gold (Au) that were attached to an AFM cantilever were approached to and retracted from a silicon wafer specimen, where the speed of tip approaching/retracting (i.e., vertical dynamics) and specimen sliding (i.e., horizontal dynamics) was controlled. First, when the vertical dynamics of colloidal tip was applied on the stationary silicon wafer specimen, it was observed that the slower tip approaching showed higher pull-in force, while the pull-off force was dependent on both the applied force and the retracting speed. For the two colloidal tips, it was found that the higher applied force and the faster tip retraction led to the higher pull-off force. Next, under the constant speed of tip approach and retraction, horizontal dynamics was applied to the silicon wafer specimen. It was observed that the horizontal motion of the specimen made the pull-off force lower, which could be attributed to the breakage of adhesive asperity junctions at the interface. The pull-off force was further decreased at faster horizontal motion of the specimen due to the longer sliding distance. Therefore, from the systematic experiments of dynamic adhesion measurement, it could be known that if a micro/nano-system is under dynamic surface interaction, its adhesive force cannot be fully described by a conventional quasi-static adhesion model but it should include the effects of applied system dynamics in both normal and tangential directions.